Call us now ! Send us an email S Dixie Highway E Pompano Beach United States

Back to Top

Consistent Results With Smart Effort - Maintaining Your Industrial Cleaning Equipment

If you operate a large commercial facility, it's likely that you rely on industrial cleaning equipment to keep your space clean and well maintained. However, when the maintenance tools themselves are in need of support, it's important to know there are steps you can take to guarantee that you'll be able to generate the best possible performance.
Dealing with malfunctioning cleaning equipment can present a huge hassle. You might find yourself struggling to rent or purchase a replacement in order to maintain your standards, and while doing so, it's likely that you'll find yourself wondering why you didn't take the necessary steps to preempt the problem.
Below, you'll find a guide to some steps you can take to maintain your industrial cleaning equipment. Following these suggestions should guarantee that your equipment will always be ready to respond to your needs and will put you in a position to secure the high performance standards that you set for yourself.

Drain Liquids

Many pieces of industrial equipment use either water or specialized cleaning solvents to remove stubborn dirt and grime from surfaces. In order to keep things as neat as possible, these fluids are typically recycled back up into the machine and then held in tanks for later disposal. Unfortunately, that method can cause a problem if the tanks slip your mind and you're not diligent about carrying through on the disposal process.
Make sure that you drain any and all liquids from your cleaning equipment before you store them at the end of the work day. Water left to sit overnight with all manner of contaminants can be foul smelling and potentially hazardous the next day, and you might make the mistake of reusing it in another cleaning operation. Chemicals and cleaning products come with similar risks, and may even cause damage to their tanks if they're left to sit for too long.

Cord Care

Almost nothing is more frustrating from a cleaning perspective than finding yourself unable to use a piece of equipment because its electrical cord has been damaged by improper usage. Not only can this result in an expensive and difficult to carry out repair, but it might also pose a significant hazard. If you're working around water or chemicals, a damaged electrical cord poses both a shock and ignition risk.
Make sure that you set up proper warning signs in any work area to deter people from approaching near the cord of your equipment. You should also stow the cord as instructed by the equipment manufacturer. Excessively tight winding could risk damaging either the insulation or the cord itself, and in many cases, a looser bunch is preferred. Optimally, you should consider purchasing tools with a retractable cord that offer an additional layer of protection.

Avoid Clogs

When you're faced with an obstacle in a cleaning task, it can be tempting to try to push the boundaries of your equipment and clear that obstacle. Unfortunately, this can be a great way to end up with a clogged hose or a jammed rotor, leaving you with a far more difficult situation to address.
If you notice resistance when applying standard cleaning pressure, then don't force your equipment. Back off, complete your task, and come back to the stubborn obstacle to see if it can be cleaned by hand.
The experienced professionals at Industrial Cleaning Equipment and Supply have all of the expertise necessary to guarantee you get the best possible performance from your industrial cleaning equipment. Following these suggestions will aid in that performance, but if you ever need service or replacements, you can be confident that your needs will be quickly and thoroughly fulfilled.